ASTM A240 type 410
ASTM A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications. Type: 410 UNS Designation : 41000 Chemical Composition Requirements, %, Max. C: 0.08-0.15 Mn: 1.00 P: 0.040 S: 0.030 Si: 1.00 Cr: 11.5-13.5 Ni: 0.75 Mechanical Test Requirements Tensile Strength, min: 450Mpa Yield Strength,…
A105 DN1150 girth flanges and A516 GR.70 elliptical heads are delivered.
Item Description of goods Quantity 1 Girth Flange OD=1280, ID=1150, Thk.= 45, ASTM A105, Machined as per the drawing provided. 2 2 Girth Flange OD=1280, ID=1150, Thk.= 55, Machined as per the drawing provided. 4 3 Girth Flange OD=1280, ID=1150, Thk.= 60, Machined as per the drawing provided. 2 4 Dished Head Ellip. 2:1, ID=1150mm, T= 10mm (Min) seamless, heat treated as per ASME Sec VIII Div.1, UCS-56 and time /temperature chart along with heat treatment report will be provided. 2
LFPCO at the Tube China – International Tube & Pipe Industry Trade Fair
Visit us at Tube China 2018.09.26-29
Booth number: E3-B30 Tube China – International Tube & Pipe Industry Trade Fair Shanghai China 2018.9.26-29 http://www.tubechina.net/en/
Seamless SA213 T12 U bends for Boiler Superheater
Pipe Curve 180º in SA213T12 Steel, Size 63,5 mm OD x 5,6 mm WT, Beveled End, Distance between Axis 381 mm x 112 mm, for Boiler Superheater, as per drawing included 6 pcs were aired to Chile. 11kg/ps
BS10 TABLE E galvanized plate flanges to Africa
STEEL FLANGE -OD450 TABLE E HOT DIP GALVANIZED 56 PCS 35KG/PC
Stainless steel class 2500 WNRJ A182 F347 & F316 flanges
These flanges were exported to abroad. STEEL FLANGE, CLASS 2500, NPS 12,ASTM A182 F347 WNRJ, XXS 4 PCS STEEL FLANGE, CLASS 2500, NPS 6, ASTM A182 F316, WNRJ, SCH160, 4 PCS
ASTM A537
ASTM A537 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel This specification covers heat-treated carbon-manganese-silicon steel plates intended for fusion welded pressure vessels and structures. Material under this specification is available in the following three classes: Class Heat Treatment Thickness Yield Strength, min, Tensile Strength, min, ksi (MPa) ksi (MPa) 1 Normalized ≤2.5in.( ≤65mm) 50…
BS 3293
BS 3293 Carbon steel pipe flanges —(Over 24 inches nominal size) —For the petroleum industry 1 Scope of BS 3293 BS 3293 Standard is a material and dimensional standard only and applies to forged carbon steel slip-on and welding neck flanges of nominal sizes 26 in and larger, for use in the petroleum industry. Drilling,…