ASTM A522 – Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service This specification covers 8 and 9 % nickel-alloy steel forged or rolled flanges, fittings, valves, and parts intended for use in welded pressure vessels for low-temperature service. The specification is applicable to forgings with maximum section…
Flange standard: JIS B 2220 Flange type: hubbed slip on welding flange Flange Class: 5k, 16k Size: 5K600A, 16K650A …… Flange face: FF Material: A105, SF440A, SS400
EN 10216-2 Seamless steel tubes for pressure purposes – Technical delivery conditions – part 2: Non- alloy and alloy steel tubes with specified elevated temperature This Part of EN10216 specifies the technical delivery conditions in two categories for seamless tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.…
ASTM A 312 Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes Grade: TP304H UNS Designation: S30409 Chemical Requirements(%) C: 0.04-0.10 Mn: ≤2.00 P: ≤0.045 S: ≤0.030 Si: ≤1.00 Cr: 18.0-20.0 Ni: 8.0-11.0 Heat Treating Temperature Solution, ≥1040 °C Tensile Requirements Tensile Strength, ≥515Mpa Yield Strength, ≥205MPa Elongation in 2 in. or 50 mm (or 4D)…
ASTM A 312 – Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes Grade: TP316Ti UNS Designation: S31635 Chemical Requirements(%) C: ≤0.08 Mn: ≤2.00 P: ≤0.045 S: ≤0.030 Si: ≤1.00 Cr: 16.0-18.0 Ni: 10.0-14.0 Mo: 2.00-3.00 Ti: 5×(C+N)-0.70 N: ≤0.10 Heat Treating Temperature Solution, ≥1040 °C Tensile Requirements Tensile Strength, ≥515Mpa Yield Strength, ≥205MPa Elongation…
ASTM A 312 Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes Grade: TP321H UNS Designation: S32109 Chemical Requirements(%) C: 0.04-0.10 Mn: ≤2.00 P: ≤0.045 S: ≤0.030 Si: ≤1.00 Cr: 17.0-19.0 Ni: 9.0-12.0 Ti: 4×(C+N)-0.70 N: ≤0.10 Heat Treating Temperature Cold finished, ≥1100 °C Hot finished, ≥1050 °C Tensile Requirements For welded pipe, Tensile Strength,…
ASTM A234 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service Grade: WP91 Chemical Composition, %： C: 008-0.12 Mn: 0.30-0.60 P: ≤0.020 S: ≤0.010 Si: ≥0.20-0.50 Cr: 8.0-9.5 Mo: 0.85-1.05 Ni: ≤0.40 Cu: ≤0.40 V: 0.18-0.25 Nb: 0.06-0.10 N: 0.03-0.07 Al: ≤0.04 Ti: ≤0.01 Zr: ≤0.01 Tensile Requirements： Tensile strength,…
EN 10216-2 Seamless steel tubes for pressure purposes – Technical delivery conditions – part 2: Non- alloy and alloy steel tubes with specified elevated temperature This Part of EN10216 specifies the technical delivery conditions in two categories for seamless tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.…
EN 10216-2 Seamless steel tubes for pressure purposes – Technical delivery conditions – part 2: Non- alloy and alloy steel tubes with specified elevated temperature This Part of EN10216 specifies the technical delivery conditions in two categories for seamless tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.…
Valve type: barred teeDesign code: ASME B31.8, AME B16.9 & MSS SP75 Design Information: Ending: BW AS PER MSS SP-75 & ASME B16.25 Size: 56″x36″ Corrosion allowance: 0 Design factor : 0.6 Design temperature C: (Min/Max)-10/85 Design pressure barg: 97 Inline thk”t”: 22.225mmOutline thk”t”: 18mm No. Of bars: 5(to confirmed by vendor) Plate thickness of…