Seamless SA213 T12 U bends for Boiler Superheater
Pipe Curve 180º in SA213T12 Steel, Size 63,5 mm OD x 5,6 mm WT, Beveled End, Distance between Axis 381 mm x 112 mm, for Boiler Superheater, as per drawing included 6 pcs were aired to Chile. 11kg/ps
BS10 TABLE E galvanized plate flanges to Africa
STEEL FLANGE -OD450 TABLE E HOT DIP GALVANIZED 56 PCS 35KG/PC
Stainless steel class 2500 WNRJ A182 F347 & F316 flanges
These flanges were exported to abroad. STEEL FLANGE, CLASS 2500, NPS 12,ASTM A182 F347 WNRJ, XXS 4 PCS STEEL FLANGE, CLASS 2500, NPS 6, ASTM A182 F316, WNRJ, SCH160, 4 PCS
ASTM A537
ASTM A537 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel This specification covers heat-treated carbon-manganese-silicon steel plates intended for fusion welded pressure vessels and structures. Material under this specification is available in the following three classes: Class Heat Treatment Thickness Yield Strength, min, Tensile Strength, min, ksi (MPa) ksi (MPa) 1 Normalized ≤2.5in.( ≤65mm) 50…
BS 3293
BS 3293 Carbon steel pipe flanges —(Over 24 inches nominal size) —For the petroleum industry 1 Scope of BS 3293 BS 3293 Standard is a material and dimensional standard only and applies to forged carbon steel slip-on and welding neck flanges of nominal sizes 26 in and larger, for use in the petroleum industry. Drilling,…
ASTM A795
ASTM A795 Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use ASTM A795 covers black and hot-dipped galvanized welded and seamless steel pipe in sizes NPS 1/2 to NPS 10 inclusive, with wall thicknesses as given in Table 1 and Table 2. Pipe having other wall thicknesses may be furnished…
BS 3799
BS 3799: Steel pipe fittings, screwed and socket-welding for the petroleum industry This British Standard specifies requirements for forged carbon and alloy steel screwed and socket -welding fittings for use in the petroleum and petrochemical industry. Screwed fittings specified in this standard are intended for assembly with pipe threaded in accordance with API Std. 5B…
Minimum thickness of 3 layer polyethylene coating
Minimum thickness of 3 layer polyethylene coating DIN 30670 – Polyethylene coatings for steel pipes and fittings Nominal size of pipe Minimum thickness of normal coating, in mm Up to DN100 1.8 Over DN100 up to DN250 2.0 Over DN250 up to below DN500 2.2 From DN500 up to below DN800 2.5 From DN800 3.0…
An order of insulation gasket kits from HONGKONG
Description of order Neoprene phenolic gasket kit, NE+PH+MYLAR+PH+ZPS AS2129 4″ TABLE E Quantity： 2 sets Date of order: 03/01/2018 Date of delivery: 03/08/2018
Order of ASTM F468HF BOLTS deliver to Jordan
Description of ASTM F468HF (alloy 400) bolts 5-8″ X 11 UNRC STUD X 4″ LONG (ETE), HEAVY HEX BOLTS AND STUDS SHALL BE CONSTRUCTED OF MONEL 400 (CLASS A) PER ASTM F468,HOT FORMED, WITH A SPECIFIED MINIMUM YIELDSTRENGTH OF 30,000 PSI (207 N/MM2), MINIMUM ELONGATION OF 29%, AND A HARDNESS BETWEEN 60 TO95 HRB, STUD…